initial condition

chauvelon · Post by **chauvelon** » Fri Jun 10, 2011 5:31 am -1100

Hi dear members

My simulation diverge so I do severals actions in order to find what could be the reason.

To do that I checked the results in WUFI2DMotion application.
I took the step 0 and I displayed the watercontent.
And I was very suprised to note that Wufi have changed my initial values.
By example a value of w= 255 for a lime concret layer (matérial from database) was changed by w= 362

Why Wufi changed initial conditions (at time 0), before any calculation.

thanks for any help
regards

PS : I checked that the value of w is lower than the maximum of water (porosity of 0.27)

veitner · Post by **veitner** » Fri Jun 10, 2011 9:48 am -1100

Hi Philippe,

thats indeed a serious bug. Will fix it asap.

Thank you for pointing to.

Regards
Veit