GROSS VOLUME

[tuba]

Hi,

I noticed in the simulation that the gross volume was calculated approximately 250 m³ less than the gross volume of the building. I made the model with one-to-one values. It turns out more when I calculate manually. what could be the reason for this. I entered the floor heights with the " user defined" of the tiles. I entered some components "from visualized geometry".
This is very important to me because I will compare it with the calculation in the standard. The simulation will be different with the volume in the calculation

Best regards

Tuğba Yıldız
M.Sc. student at Istanbul Technical University, Turkey

[Thomas]

[Answered by email, 2022-09-02]