GROSS VOLUME

Everything that didn't fit in any other topic
Post Reply
tuba
WUFI User
WUFI User
Posts: 6
Joined: Thu May 26, 2022 10:26 am -1100

GROSS VOLUME

Post by tuba » Mon Aug 29, 2022 1:42 am -1100

Hi,

I noticed in the simulation that the gross volume was calculated approximately 250 m³ less than the gross volume of the building. I made the model with one-to-one values. It turns out more when I calculate manually. what could be the reason for this. I entered the floor heights with the " user defined" of the tiles. I entered some components "from visualized geometry".
This is very important to me because I will compare it with the calculation in the standard. The simulation will be different with the volume in the calculation

Best regards

Tuğba Yıldız
M.Sc. student at Istanbul Technical University, Turkey

Thomas
WUFI Administrator
WUFI Administrator
Posts: 389
Joined: Sun Jun 19, 2005 10:33 pm -1100

Re: GROSS VOLUME

Post by Thomas » Sun Sep 04, 2022 11:50 pm -1100

[Answered by email, 2022-09-02]

Post Reply