Indoor Climate - User Defined 162 Mean Temperature

Post Reply
rrenaud
WUFI User
WUFI User
Posts: 11
Joined: Tue Apr 06, 2010 7:31 am -1100
Location: Ann Arbor, Michigan
Contact:

Indoor Climate - User Defined 162 Mean Temperature

Post by rrenaud » Thu May 17, 2018 4:36 am -1100

I am trying to use a User Defined Indoor Climate under the Sine Curves. I set the Mean Temperature at 72 degrees F with a 3 degree Amplitude. When I run the simulation it changes the indoor Mean Value to 162 degrees F and and Amplitude to 5.4 degrees F. I change it back to rerun and it changes it again.

I can't get it to run the simulation that is not a hot sauna indoor condition. What am I missing? Does anyone else have this problem?

I am running WUFI PRO V.6.0
Release 6.0.1.2024.DB.26.0.15.0
Last edited by rrenaud on Thu May 17, 2018 4:49 am -1100, edited 1 time in total.

Manfred Kehrer
WUFI International Support Team
WUFI International Support Team
Posts: 351
Joined: Thu Mar 10, 2005 2:17 am -1100
Location: Northbrook, IL; USA
Contact:

Re: Indoor Climate - User Defined 162 Mean Temperature

Post by Manfred Kehrer » Thu May 17, 2018 4:43 am -1100

Hello rrenauld,
I am not sure which version you use but the free update to 5.3 should solve the problem, I just checked it. Fraunhofer IBP may support you with the download link for this.
Manfred
Wiss, Janney, Elstner Associates, Inc.
Official WUFI® Collaboration Partner for USA/Canada
Enjoy WUFI® :) .... It is easy and complex.

rrenaud
WUFI User
WUFI User
Posts: 11
Joined: Tue Apr 06, 2010 7:31 am -1100
Location: Ann Arbor, Michigan
Contact:

Re: Indoor Climate - User Defined 162 Mean Temperature

Post by rrenaud » Thu May 17, 2018 5:56 am -1100

Upgraded to 6.2....problem solved.

Thank you.

Post Reply