Wufi Bio - Water content of Pore graph

All about WUFI post-processing modules and add-ons
Post Reply
ALC
WUFI User
WUFI User
Posts: 4
Joined: Mon Jul 03, 2017 7:27 pm -1100

Wufi Bio - Water content of Pore graph

Post by ALC » Sat Mar 21, 2020 1:49 pm -1100

Hi everyone,

I'm currently trying to model a wall build -up in different climats. However, the output graph is confusing me: the water content of pore graph seems to stop after a few years? Not droppping to zero, just stopping - see screenshots. Is that normal? Does that just mean that the spore are dry and/or they remain under the critical water content so the software assumes it doesn't need to go further? Or is there some kind of glitch in the model?
Attachments
water content 3.PNG
water content 3.PNG (74.69 KiB) Viewed 5833 times
water content 2.PNG
water content 2.PNG (85.95 KiB) Viewed 5833 times
water content 1.PNG
water content 1.PNG (42.32 KiB) Viewed 5833 times

Christian Bludau
WUFI SupportTeam IBP
WUFI SupportTeam IBP
Posts: 1130
Joined: Tue Jul 04, 2006 10:08 pm -1100
Location: IBP Holzkirchen, the home of WUFI
Contact:

Re: Wufi Bio - Water content of Pore graph

Post by Christian Bludau » Wed Mar 08, 2023 3:46 am -1100

This may be corrected in the latest version. Please check and come back to us, if issue still appears.
Christian

Post Reply