loads by zone in multi-zone project

All about WUFI Passive
Post Reply
hbreaux
WUFI User
WUFI User
Posts: 20
Joined: Mon Jun 20, 2016 2:34 am -1100

loads by zone in multi-zone project

Post by hbreaux » Mon Jun 18, 2018 7:09 am -1100

Hi!

In WUFI Passive, is it possible to see loads broken out per zone in a multi-zone energy model?

It seems that we either make a separate energy model for each zone or use WUFI Plus and even then I'm not sure WUFI Plus and WUFI Passive are apples to apples.

Thanks! And, let me know if I can provide any clarification.

mpazold
WUFI SupportTeam IBP
WUFI SupportTeam IBP
Posts: 185
Joined: Wed Jul 11, 2012 11:21 pm -1100

Re: loads by zone in multi-zone project

Post by mpazold » Thu Mar 14, 2019 11:43 pm -1100

The passive house verficiation calcualtion, or monhtly heat balance calculation is not an multizone model, at least for the overall building thermal zone. only attached zones, like an unheated garage can be regarded.

The dynamic simulation model is a multizone model. But of cause it is a dynamic hourly simulation compared to a static monhtly balance calculation.

Post Reply