WUFI Pro time steps

All about WUFI Pro
Post Reply
tobiasfaukald
WUFI User
WUFI User
Posts: 1
Joined: Thu Feb 04, 2021 10:02 pm -1100

WUFI Pro time steps

Post by tobiasfaukald » Thu Feb 04, 2021 10:07 pm -1100

Hello!

I have been using WUFI Pro and I want to change the time step of my simulations from 1 hour to 24 hours, i.e 1 day.
In time/profile I see the option time step [h] and I have changed this to 24. I thought that this would mean that my result file will have iterations going from day to day. But when I open the .txt file from the WUFI- Graph the iterations is still in hours. Is there another way to change this?

Thanks in advance :o

Thomas
WUFI Administrator
WUFI Administrator
Posts: 417
Joined: Sun Jun 19, 2005 10:33 pm -1100

Re: WUFI Pro time steps

Post by Thomas » Thu Feb 04, 2021 10:26 pm -1100

Hi Tobias,

you are probably using a climate file with hourly time steps. WUFI does not allow a calculational time step which is larger than the time step of the climate file and automatically adjusts the calculational time step accordingly. A climate file with 24-hour-steps allows the calculation to run with 24-hour-steps, for example the file "IBP1991_24h_means.kli" in WUFI's project folder.

Regards,
Thomas

Post Reply