Material Data for Australia and New Zealand

Everything concerning the adequate application of WUFI in New Zealand and Australia depending on local conditions e.g. architecture, building codes, standardization, laws et cetera.
Post Reply
Jesse Clarke
WUFI International Support Team
WUFI International Support Team
Posts: 2
Joined: Thu Oct 08, 2015 5:26 pm -1100

Material Data for Australia and New Zealand

Post by Jesse Clarke » Mon Dec 03, 2018 5:20 pm -1100

Hello Australia and NZ WUFI users,
I would like to find out who would be interested in collaborating on the development of Hygrothermal data for Australian and New Zealand materials.
To get the conversation started I would like to understand what you may be using as standard materials selections in calculations for common materials such as plasterboard, brickwork, plywood, OSB, glass wool, polyester batts, PIR, XPS, EPS etc.
Any information or feedback appreciated.
Regards,
Jesse

Manfred Kehrer
WUFI International Support Team
WUFI International Support Team
Posts: 351
Joined: Thu Mar 10, 2005 2:17 am -1100
Location: Northbrook, IL; USA
Contact:

Re: Material Data for Australia and New Zealand

Post by Manfred Kehrer » Thu Dec 13, 2018 4:25 am -1100

Hello Jesse,
nice to see some WUFI activity down under :)
Manfred
Wiss, Janney, Elstner Associates, Inc.
Official WUFI® Collaboration Partner for USA/Canada
Enjoy WUFI® :) .... It is easy and complex.

Dimas Rodriguez
WUFI User
WUFI User
Posts: 2
Joined: Mon Apr 01, 2019 3:22 pm -1100

Re: Material Data for Australia and New Zealand

Post by Dimas Rodriguez » Mon Apr 01, 2019 3:34 pm -1100

Mineral wool, EPS, EPS, type X Gyp, steel battens, wood framing, concrete w/ admix. Trying to get the material data for Adhero and Vaproshield SA at the moment. What are the options as far as asphaltic self adhered membranes. Will be trying to sift through the library to put together a library that is more specific to the product availability here.

Post Reply