moisture fluxes

Everything concerning the adequate application of WUFI in the USA and Canada depending on local conditions e.g. architecture, building codes, standardization, laws et cetera.
Post Reply
edgararq
WUFI User
WUFI User
Posts: 4
Joined: Mon Jul 22, 2013 10:27 am -1100

moisture fluxes

Post by edgararq » Wed Aug 14, 2013 10:33 pm -1100

Is there in WUFI ORNL an option to measure moisture fluxes at key points or at the interface of two layers for determined periods of time?

Kind Regards,
Edgar.
Top
Christian Bludau
WUFI SupportTeam IBP
WUFI SupportTeam IBP
Posts: 1130
Joined: Tue Jul 04, 2006 10:08 pm -1100
Location: IBP Holzkirchen, the home of WUFI
Contact:
Contact Christian Bludau

Re: moisture fluxes

Post by Christian Bludau » Sun Aug 18, 2013 8:28 pm -1100

Hello Edgar,
the fluxes can be exported via ASCII-Export. That is not possible in the free versions.
You can display the courses in the result graph viewer.
Christian
Top
Post Reply

Return to “WUFI North America”