Everything concerning the adequate application of WUFI in the USA and Canada depending on local conditions e.g. architecture, building codes, standardization, laws et cetera.
-
Sum1
- WUFI User
- Posts: 2
- Joined: Fri Jan 11, 2013 5:15 am -1100
Post
by Sum1 » Fri Jan 11, 2013 5:39 am -1100
Hi,
I recently installed WUFI ORNL 5.2. After I create an assembly and modify the other parameters as required, the option to run a calculation is grayed out. (All the check marks are green and I have saved the file.) I have even tried the sample files included with no luck, as well as reinstalling the program. Any other suggestions?
Thanks!
-
Manfred Kehrer
- WUFI International Support Team
- Posts: 351
- Joined: Thu Mar 10, 2005 2:17 am -1100
- Location: Northbrook, IL; USA
-
Contact:
Post
by Manfred Kehrer » Fri Jan 11, 2013 6:20 am -1100
Hello Sum1,
could you please provide us with Release number.
You will find it at the download menu named "?" | "About WUFI"
Kind Regards,
Manfred
Manfred
Wiss, Janney, Elstner Associates, Inc.
Official WUFI® Collaboration Partner for USA/Canada
Enjoy WUFI®
.... It is easy and complex.
-
Sum1
- WUFI User
- Posts: 2
- Joined: Fri Jan 11, 2013 5:15 am -1100
Post
by Sum1 » Fri Jan 11, 2013 7:08 am -1100
Release: 5.2.0.972.DB.24.76
-
Christian Bludau
- WUFI SupportTeam IBP
- Posts: 1129
- Joined: Tue Jul 04, 2006 10:08 pm -1100
- Location: IBP Holzkirchen, the home of WUFI
-
Contact:
Post
by Christian Bludau » Sun Jan 13, 2013 9:53 pm -1100
Hello Sum1,
in Wufi ORNL you only can calculate with film. Please use the symbol right to the two hourglass symbols to calculate.
Christian