I'm am attempting to model an unvented roof assembly in Austin Texas and I am receiving no convergence issues but my balance if off by about 6.
Balance 1: -.35
Balance 2: -6.3
Am I don't something wrong with the model?
-Matthew
Unvented roof modeling issues
-
Matthew Martinez
- WUFI User
- Posts: 1
- Joined: Wed Sep 29, 2021 8:08 am -1100
Unvented roof modeling issues
-Matthew
-
Christian Bludau
- WUFI SupportTeam IBP
- Posts: 1130
- Joined: Tue Jul 04, 2006 10:08 pm -1100
- Location: IBP Holzkirchen, the home of WUFI
- Contact:
Re: Unvented roof modeling issues
Dear Matthew,
with this short description it is not really possible to help you.
Maybe try to split the air layer, as this may be related to interstitial condensation:
viewtopic.php?f=32&t=1777&p=5226#p5226
Christian
with this short description it is not really possible to help you.
Maybe try to split the air layer, as this may be related to interstitial condensation:
viewtopic.php?f=32&t=1777&p=5226#p5226
Christian