Unvented roof modeling issues

Everything concerning the adequate application of WUFI in the USA and Canada depending on local conditions e.g. architecture, building codes, standardization, laws et cetera.
Post Reply
Matthew Martinez
WUFI User
WUFI User
Posts: 1
Joined: Wed Sep 29, 2021 8:08 am -1100

Unvented roof modeling issues

Post by Matthew Martinez » Wed Sep 29, 2021 8:16 am -1100

I'm am attempting to model an unvented roof assembly in Austin Texas and I am receiving no convergence issues but my balance if off by about 6.

Balance 1: -.35
Balance 2: -6.3

Am I don't something wrong with the model?

-Matthew
-Matthew
Top
Post Reply

Return to “WUFI North America”