I have a pitched roof with slates. The slates, ventilated air cavity and batten are not simulated. The outer boundary of the simulation is the vapor tight underroof layer.
Which rain reduction factor should be used in this roof?
Rain reduction factor for roofs
-
Christian Bludau
- WUFI SupportTeam IBP
- Posts: 1130
- Joined: Tue Jul 04, 2006 10:08 pm -1100
- Location: IBP Holzkirchen, the home of WUFI
- Contact:
Re: Rain reduction factor for roofs
Switch of the rain (0) as you start at the weathering barrier and there is no direct rain in reality.