Mould post-processor for WUFI 2D

All about WUFI 2D
Post Reply
johannbjorn
WUFI User
WUFI User
Posts: 12
Joined: Tue Mar 20, 2018 4:21 am -1100
Contact:

Mould post-processor for WUFI 2D

Post by johannbjorn » Thu Mar 28, 2019 2:32 am -1100

Dear forum,

I have used Wufi BIO and WUFI Mould index VTT with Wufi Pro 6 before.

Now I am using WUFI 2D and I want to post-process the mould risk in my construction from the results of the simulations.

Does there exist an Add-on, post-processor or a way to do this?

Warm regards, Jóhann

Christian Bludau
WUFI SupportTeam IBP
WUFI SupportTeam IBP
Posts: 1129
Joined: Tue Jul 04, 2006 10:08 pm -1100
Location: IBP Holzkirchen, the home of WUFI
Contact:

Re: Mould post-processor for WUFI 2D

Post by Christian Bludau » Thu Mar 28, 2019 4:06 am -1100

Hi Johann,

if you generate an isopleths diagram in WUFI Graph, you can do a right click on the diagram and export directly to use in the installed post process modules:
postprocess2d.jpg
postprocess2d.jpg (44.08 KiB) Viewed 6452 times

Please note: that only works if only one course is in the isopleth diagram.

Christian

johannbjorn
WUFI User
WUFI User
Posts: 12
Joined: Tue Mar 20, 2018 4:21 am -1100
Contact:

Re: Mould post-processor for WUFI 2D

Post by johannbjorn » Thu Mar 28, 2019 11:22 pm -1100

Hi Christian,

Many thanks!

Regards, Jóhann

Post Reply