3ply laminated timber( IBP WUFİ materials) different water content diagram

All about WUFI 2D
Post Reply
beggy
WUFI User
WUFI User
Posts: 1
Joined: Wed Feb 20, 2019 8:21 pm -1100

3ply laminated timber( IBP WUFİ materials) different water content diagram

Post by beggy » Sat Mar 09, 2019 11:54 am -1100

Hi ,
I am student from University of İstanbul Tecnical and currently conducting a master thesis project. I use WUFI 2D.4.1 to simulate the Cross Laminated Timber wall for Istanbul climate , I edit 3ply laminated timber( IBP WUFİ materials),however simulation result the attached diagram shows still a sudden rising of the water content from 100 to 350 kg / m³ or 20-70%. This is not realistic. What should I do? I use similar materai such as STORA ENSO or KLH massivholz material but this diagram not sudden rising of the water content.What is the cause?Numerical grid 120x120,initial conditions EN15026,time step 8760 one year
Attachments
STORA.jpg
STORA ENSO CLT
STORA.jpg (111.98 KiB) Viewed 4260 times
1.jpg
3ply laminated timber( IBP WUFİ materials)
1.jpg (88.07 KiB) Viewed 4260 times
2.jpg
3ply laminated timber( IBP WUFİ materials)
2.jpg (85.52 KiB) Viewed 4260 times

Christian Bludau
WUFI SupportTeam IBP
WUFI SupportTeam IBP
Posts: 1129
Joined: Tue Jul 04, 2006 10:08 pm -1100
Location: IBP Holzkirchen, the home of WUFI
Contact:

Re: 3ply laminated timber( IBP WUFİ materials) different water content diagram

Post by Christian Bludau » Wed Mar 13, 2019 5:09 am -1100

Hi Beggy,
looks like your timber is exposed to rain. Can you please post a picture of your construction and your transfer settings.
Christian

Post Reply