WUFI Graph - Graph with data from 2 files

[Bastien]

Hello,
In WUFI Graph, I would like to draw a graph with 2 curves from 2 differents WUFI results files (.wfd).
I saw that it's possible to select the ".wfd" file in the "select values" window but, even if I choose an other file, it doesn't work... Is there an other way to do it?
Thank you for your help!
Bastien

[Christian Bludau]

Hi Bastien,

it should work by select the other result file in the upper left window and then just add the wanted series as usual.
What is happening, if you try that?

Christian

[Bastien]

Hello Christian,

Thank you for your answer. If I draw a first curve from a result file and then choose another result file in upper left window (then select the part I want to study and then clic OK), the result file used in the options of the curve (user define window - right clic in the name of the curve - options) is the first one and not the second one.

Sorry if I'm not clear enough...

Thank you again

Bastien

[Christian Bludau]

Hello Bastien,

are you sure that over here (see red box) the right file was set as well?

menu_type_isoline.jpg (42.31 KiB) Viewed 9755 times

What version of WUFI Graph do you work with?

Christian

[Bastien]

Hello Christian,
Yes, as you can see, the two files are set.
If I choose a first file to draw a first curve and then select the other file to draw a second curve, the file used for the second curve is still the first file...
I use WUFI Graph 2.5.2.
Bastien

[Christian Bludau]

Sent you a PM.

[anderssonsandholm]

Sent you a PM.

Experiencing the exact same problem. What is the solution? Please send me the PM.

Best regards,
Wilhelm