Problem with old file after updating

Post Reply
Nicolas R.
WUFI User
WUFI User
Posts: 5
Joined: Thu Jun 20, 2013 11:43 pm -1100

Problem with old file after updating

Post by Nicolas R. » Tue Jun 02, 2015 9:17 pm -1100

Hi,

I performed simulations in november with the 5.3 version of wufi. I updated since with the new 5.3 january version.
I try to open the simulation to update them with new hypothesis but I have those 2 windows poping (the 1st one two times and the 2nd one only once).
Any solution?

Cheers,
Attachments
Error.jpg
Error.jpg (34.74 KiB) Viewed 10948 times

Christian Bludau
WUFI SupportTeam IBP
WUFI SupportTeam IBP
Posts: 1129
Joined: Tue Jul 04, 2006 10:08 pm -1100
Location: IBP Holzkirchen, the home of WUFI
Contact:

Re: Problem with old file after updating

Post by Christian Bludau » Tue Jun 02, 2015 11:19 pm -1100

Dear Nicolas,

that happens, if there was a problem with storing the file or the files was changed external. There is no possibility to restore that.

That is no update issue.

Christian

Nicolas R.
WUFI User
WUFI User
Posts: 5
Joined: Thu Jun 20, 2013 11:43 pm -1100

Re: Problem with old file after updating

Post by Nicolas R. » Wed Jun 03, 2015 10:19 pm -1100

Hi Christian,

thanks for replying.
I get what a storing problem is (my hard-drive is getting old makes errors for example )
But what do you mean by "files was changed external" ?

Christian Bludau
WUFI SupportTeam IBP
WUFI SupportTeam IBP
Posts: 1129
Joined: Tue Jul 04, 2006 10:08 pm -1100
Location: IBP Holzkirchen, the home of WUFI
Contact:

Re: Problem with old file after updating

Post by Christian Bludau » Mon Jun 08, 2015 2:50 am -1100

There are some people who want to change the w5p-file using own codes or other software. But if the w5p-file is changed by a third program it shows the same error. But that only happens wanted, not unwanted.
Christian

Post Reply